Reply With Quotehttp://www.crappie.com/gr8vb3/showthread.php?t=3938 this link shows how some of the members have made their own. i have tried it and it works. the only problem i have had is the pvc breaking on me while i am boring the half hole for the rod.
Likes: 0
Thanks: 0
HaHa: 0
Guppy
rod holders
Has anyone made your own rod holders. One's you can hang your 12' rod out over the side of the boat. Some of us poor boys can't afford 4 or so holders at a minimum of $20 bucks each.
Last edited by CrappiePappy; 05-20-2005 at 12:07 PM. Reason: clarity
Crappie Wall Hanger II
http://www.crappie.com/gr8vb3/showthread.php?t=3938 this link shows how some of the members have made their own. i have tried it and it works. the only problem i have had is the pvc breaking on me while i am boring the half hole for the rod.
Crappie.com 1K Star General
bass and dirk, try cutting a smaller hole than the one you make for the rod end. I used a 1 inch hole saw. Then use a jig saw to cut up and make it so the tip end of the rod to fit in and is pretty tight to the sides of the plastic.
Posting Permissions
