Those are pretty neat. You could also put them on a bracket off 2 of the bolts under the seat, then you won't have to bend over to reach them. Always good to see money saving ideas.
I thought I would share this with everyone. I have no cup holders or anything to store spray or water bottle up front while fishing so I made this. Still needs to add some paint to it or finish cleaning them up. Made out of 3" pvc pipe and used a cutting board for the bottom and glued them togther with a hot glue gun.
Here are a couple more pictures, I used a rotozip make (2) 1/2" long slot by about 1/4" wide, down from the top about 1-1/2" and about 1-1/2" apart. Then just threaded the hose clamp through and tighted it down. Before I mounted them I took a cheap cutting board marked out the inside of the pipe. And cut them with a coping saw, then tapped them in with a hammer down about 1/8" then used a hot glue gun on the inside and outside. It probably need's a hole in the bottom to let water drain out.
Side View
View of the bottom
View looking down from the top.
Ted
Neither snow nor rain nor heat nor gloom of night will keep me from crappie fishing!
2010 Lake of the Ozarks Super Slab Champion
Those are pretty neat. You could also put them on a bracket off 2 of the bolts under the seat, then you won't have to bend over to reach them. Always good to see money saving ideas.
Looks good.
PB Wht. Crappie 2.48 lbs 02-12-2011
Good Thinkin' there. That is very useful. Thanks
Smart thinkin. Small drain holes so jigs n stuff don't get hung.
Creativity is just intelligence fooling around