For square rails on a pontoon I would look at DRIFTMASTER!
Does anyone know of a good rod holder to mount on the 1" square rails of a Pontoon Boat?
For square rails on a pontoon I would look at DRIFTMASTER!
I really like these:
http://www.cabelas.com/cabelas/en/te...lder&noImage=0
They are easy to use and you can easily change position of them.
redneck style 3/4x6 treated with 1 1/2 holes drilled in...Tested on 78lb blue,and holds drinks nicely too.
DRIFTMASTER HAS 2 BASES THAT WILL WORK ON YOUR PONTOON RAIL. MODEL 216 FOR 3/8 THREADS AND 206 BASE FOR 1/2 INCH THREAD. USE THE 206 FOR "T" BARS THAT CAN HOLD UP TO 4 ROD HODERS. DRIFTMASTER HAS SOME NEW BARS UP TO 8 FEET LONG THAT CAN MOUNT ACROSS THE BACK OF THE BOAT. CHECK OUT DRIFTMASTER.COM.
MONK http://MONKSCRAPPIE.COM
DRIFTMASTER! check them out, if they do not have what you want call them and they will make it, these guys are awsome! they will have what you need.
WE NEED MORE COWBELL
I used PVC pipe. on a flat board, made it where the pipe would rotate on U shaped brachet and 1/4" bolt. Do alot of trolling on Sardis, Ms.
board works better,one rod get a hit you are on piont! the whole boards and all rod move ...
Thanks for the input. I have Driftmasters on my Bassboat(Crappie boat). The pontoon is something Mama'nm wanted. I may learn to like it, but right now, still trying to get it rigged out. If anyone has any suggestions for rigging a Fishing Pontoon, these would be welcomed.
toothpick, here are a couple pictures of my homemade holders. I removed the furniture from my pontoon and use lawn chairs and the front fishing seats. The cooler is a homemade livewell too. Hope this gives you some ideas if you have an older pontoon. If it's new then go with the driftmasters. Ferdi aka Fred
Attachment 13128
Attachment 13129
Last edited by Ferdi; 03-13-2008 at 05:51 PM.