PDA

View Full Version : Stake Driver



crappie cowboy
07-26-2007, 09:43 PM
Can anybody tell me how to build a stake driver to make stake beds for crappie in about 18 ft. of water?.

spider rig man

1weezer
07-26-2007, 11:34 PM
Send me a pm with your email address in it and I will send you some prints of what I use for a stake bed driver. You can put the stakes in as deep a water as you want to.

bobberdown
07-27-2007, 12:04 AM
Try sharpening your stake about 24" from the bottom and punching a hole in a 3lb coffee can and fit it onto the stake then fill the can with Quick-create. Just drop where you want them and they will stick up if the bottom is soft.http://i157.photobucket.com/albums/t76/bobberdown_2007/stake.jpg

crappie cowboy
07-27-2007, 12:42 AM
Bobberdown, Man that's cool.....:eek:
Thanks .......srm

drill instructor
07-27-2007, 05:52 AM
i was just about to tell you to contact 1weezer, also he did a show with Russ that shows his stake driver in action. I recommend getting the video also, some great info on stake placements.

father of 4
07-27-2007, 08:17 AM
I have a 14 year old boy. Didnt take long to make him either. Great stake driver lol. Not sure about the other but I bet its less expensive lol

redneckradtech
10-31-2007, 09:50 AM
Send me a pm with your email address in it and I will send you some prints of what I use for a stake bed driver. You can put the stakes in as deep a water as you want to.
I would like these pics and ideas. please post

creekslick
10-31-2007, 11:42 AM
Here is a picture of one somebody posted awhile back. You can add all the pipe you need to work in deeper water. I made mine with two sections 10' that can be screwed together to drive stakes in 20' of water.
http://i105.photobucket.com/albums/m212/creekslick/driver.jpg

hogster
10-31-2007, 01:59 PM
Thats it.Weezer sent me that print.:D

redneckradtech
11-08-2007, 07:00 AM
Here is a picture of one somebody posted awhile back. You can add all the pipe you need to work in deeper water. I made mine with two sections 10' that can be screwed together to drive stakes in 20' of water.
http://i105.photobucket.com/albums/m212/creekslick/driver.jpg

Having trouble viewing the image (can't open it)
please send to redneckradtech@yahoo.com
Most appreciated, want to get drivin these stakes, got lots of hardwood scrap moulding in 3-6 ft sticks