Stake Driver

[crappie cowboy]

Can anybody tell me how to build a stake driver to make stake beds for crappie in about 18 ft. of water?.

spider rig man

[1weezer]

Send me a pm with your email address in it and I will send you some prints of what I use for a stake bed driver. You can put the stakes in as deep a water as you want to.

[bobberdown]

Try sharpening your stake about 24" from the bottom and punching a hole in a 3lb coffee can and fit it onto the stake then fill the can with Quick-create. Just drop where you want them and they will stick up if the bottom is soft.

[crappie cowboy]

Bobberdown, Man that's cool.....
Thanks .......srm

[drill instructor]

i was just about to tell you to contact 1weezer, also he did a show with Russ that shows his stake driver in action. I recommend getting the video also, some great info on stake placements.

[father of 4]

I have a 14 year old boy. Didnt take long to make him either. Great stake driver lol. Not sure about the other but I bet its less expensive lol

[redneckradtech]

Send me a pm with your email address in it and I will send you some prints of what I use for a stake bed driver. You can put the stakes in as deep a water as you want to.

I would like these pics and ideas. please post

[creekslick]

Here is a picture of one somebody posted awhile back. You can add all the pipe you need to work in deeper water. I made mine with two sections 10' that can be screwed together to drive stakes in 20' of water.

[hogster]

Thats it.Weezer sent me that print.:D

[redneckradtech]

Here is a picture of one somebody posted awhile back. You can add all the pipe you need to work in deeper water. I made mine with two sections 10' that can be screwed together to drive stakes in 20' of water.

Having trouble viewing the image (can't open it)
please send to [email protected]
Most appreciated, want to get drivin these stakes, got lots of hardwood scrap moulding in 3-6 ft sticks