PDA

View Full Version : Right and Left Dual Boat Seat



Fish Police
06-26-2007, 12:47 PM
Hey Crappie fihermen, need some help in locating a dual boat seat side by side all in one piece. I have looked at the product at www.titelok.com but it is too expensive for my budget. Just bought a G3 Panfish boat and want a dual seat up front for when I crappie fish with a spider rig setup. (me and big brother up front so we don't miss any fish) I know that somebody that post's on Crappie.com has this in there boat or knows of a website or a place I can visit to get one. Any help much Appreciated!:D

Ranger690
06-26-2007, 12:55 PM
I like the looks of this, but they don't seem to be available. Several messages left in the last year have not been returned.

http://www.shorelinepro.com/addaseat.asp

Cool design. Wish I knew the story.

Dayton

Jigster
06-26-2007, 12:57 PM
I use a Wally Marshall "Double Down" seat base. Bass Pro sells em.

Works good for me.

Jigster

slabmaster09
06-26-2007, 02:17 PM
Im with jigster on that one. The wally marshall double down seat base would work great.

skiptomylu
06-26-2007, 02:38 PM
I don't know for sure if any of this would be any good for you , but here is a couple of links. Also when I had my G3 Panfish we just used good stout folding chairs I got from Sam's club.

Anyway here is a fold down bench seat...
http://www.cabelas.com/cabelas/en/templates/pod/standard-pod.jsp?_DARGS=/cabelas/en/common/catalog/pod-link.jsp_A&_DAV=MainCatcat21276-cat21334&rid=&indexId=cat21334&navAction=push&masterpathid=&navCount=3&parentType=index&parentId=cat21334&id=0036310

Another...
http://www.cabelas.com/cabelas/en/templates/pod/horizontal-pod.jsp?_DARGS=/cabelas/en/common/catalog/pod-link.jsp_A&_DAV=MainCatcat21276-cat350009&rid=&indexId=cat350009&navAction=push&masterpathid=&navCount=8&parentType=index&parentId=cat350009&id=0043383

Really nice folding deck chairs...
http://www.cabelas.com/cabelas/en/templates/product/standard-item.jsp?_DARGS=/cabelas/en/common/catalog/item-link.jsp_A&_DAV=MainCatcat21276-cat21334&id=0043945019071a&navCount=3&podId=0043945&parentId=cat21334&masterpathid=&navAction=push&catalogCode=IH&rid=&parentType=index&indexId=cat21334&hasJS=true

MSCRAPPIE33
06-26-2007, 03:39 PM
I Make A Real Nice One That You Can Take On And Off That I Am Thinking About Starting To Make To Sell. It Fits Right In The 3/4" Base Thats Already There. All I Need Is The Width That You Need It To Be. It Is 1/4" Plate With A Rubber Back On It. Real Nice. I Will Take A Picture Tonight And Post It Wednesday. They Will Cost 125.00 To 150.00

ShilohRed
06-26-2007, 04:34 PM
I Make A Real Nice One That You Can Take On And Off That I Am Thinking About Starting To Make To Sell. It Fits Right In The 3/4" Base Thats Already There. All I Need Is The Width That You Need It To Be. It Is 1/4" Plate With A Rubber Back On It. Real Nice. I Will Take A Picture Tonight And Post It Wednesday. They Will Cost 125.00 To 150.00

That sounds like it will work.
I plan on building one out of SQ tubing 2" and fix it where the seat base that is there holds in it. And then fix the 2" tubing where it will move to allow you to move one seat forward while the other side is back. Or where ever you would like them.
Pin each side of the plate that will accept the seat pole you stick into your set base .
Pete

badbrad
06-26-2007, 06:35 PM
I use the Wally Marshall double down as well. Works excellent on my the front of my bass boat that's been converted to a crappie boat. I'd recommend spending extra on good seats though.

Fish Police
07-01-2007, 09:45 PM
MSCRAPPIE33 when are you going to post the picture of your product?

MSCRAPPIE33
07-02-2007, 07:39 AM
I'll Take Them Tonight And Post In The Morning

ShilohRed
07-05-2007, 06:53 PM
Well I found one on-line. So guess its close enough to what I was going to build. That I may just look into one like this.

http://www.shorelinepro.com/addaseat.asp
Pete

Ranger690
07-05-2007, 07:55 PM
ShiloRed, that is the link I put in the first reply above. Let me know if you get in touch with them. I can't.

thanks,

Dayton

Mr.Crappie
07-05-2007, 09:58 PM
Hey to let all crappie anglers know about the Double Down seating it is 44" wide and 17" deep and rotates and seating has swivels Makes it Real Handy. I got a email last night from weezer1 and he was telling me about how many crappie anglers ask about the Double Down for their boats. If you have any question about this product. www.tempress.com or you can contact weezer1 here on Crappie.com
Good Fishing
Wally Marshall
designer of the Swinging Single and Double Down Seat Bases

stevem
07-26-2007, 08:32 PM
Anybody ever find out anything about the shorelinepro add-a-seat...I've also tried to contact them with no luck.:( :(

rango
07-27-2007, 04:59 AM
if you got room for a dual seat setup, id just use two fold up metal chairs with cushions for comfort. i had boat seats on my boat at one time, and scrapped it for the fold ups. less weight and more comfort and less storage room required. its also easy to move the seat to the most comfortable position to reach the rods.

AddaSeatRep
06-18-2008, 01:01 PM
Add-a-Seat NOW AVAILABLE!!!

Brief corporate background: Shoreline Products is the original designer of the product and holds the patent. e2 Innovative Solutions (a product development and sales company) has partnered with Shoreline as the US distributor for Add-a-Seat.

Retail price for Add-a-Seat is $209 + shipping (from Indianapolis). We are now taking orders for the new, redesigned Add-a-Seat and if you want more information or would like to be one of the first to reserve the product, please contact me 317-704-3266 or toliver@echosupply.com. Thanks.

pstone
06-19-2008, 04:03 PM
A buddy built this one for me. Works like a charm...And it fits in a 3/4 inch seat base to hold it in place.
http://i16.photobucket.com/albums/b24/pstone83/105_0598.jpg

jhef
06-19-2008, 10:33 PM
i got the add a seat and its great, they had probs getting it manufactured and put on the market but they are up and going now,,

waterboy1
06-20-2008, 12:28 AM
I didn't have the cash to buy something ready made but I had a couple seats laying around, so I made my own out of about $15 in cull lumber from Home Depot.

http://i294.photobucket.com/albums/mm111/waterboy-album/IMG_2147.jpg

sac-a-lait
06-20-2008, 04:45 PM
Here's the double down and one made by a guy here in Mississippi named Brad.

dmann436
06-21-2008, 12:05 PM
[QUOTE=Mr.Crappie;319122]Hey to let all crappie anglers know about the Double Down seating it is 44" wide and 17" deep and rotates and seating has swivels Makes it Real Handy.

I have one of WM dbl seats - get one - you'll like it, works fine in the front and rear of my boat.