Jig pouring

[taylmatr]

Whats a good site to get equipment for pouring my own jigs. Im gonna need a melter and some 1/16 and 1/8 molds. I can buy the jigs around here but it seems everytime i need them they either dont have them or the barbs on them are not up to par. So im gonna give it a go myself.

[RagflyJigMan]

I think that your best bet is going to be "Barlow's Tackle". They have just about anything that you will need.

[RagflyJigMan]

Forgot to also tell you that if you have any problems PM me and I will try and help you out. I used to own my own jig business.

[Barnacle Bill]

Whats a good site to get equipment for pouring my own jigs. Im gonna need a melter and some 1/16 and 1/8 molds. I can buy the jigs around here but it seems everytime i need them they either dont have them or the barbs on them are not up to par. So im gonna give it a go myself.

These people have everything you need. http://www.barlowstackle.com/

[EDDY CREEK BANDIT]

I buy from DO-IT MOLD COMPANY.
THE BANDIT

[taylmatr]

What size hooks for 1/16 and 1/8?

[Timmy Tom]

I use a no.2 on 1/16 and a no.1 on 3/32. That sells good here in west central Arkansas. Some like big hooks and some like little hooks and the rest of us use medium sizes. 1/0 is not much bigger than a no. 1.

TT

[skiptomylu]

What size hooks for 1/16 and 1/8?

I keep a stock of jig heads with #4, #6 & #8 hooks for both of that weight jig. I probably don't really need the #8 in 1/8, but I have them.