Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Results 1 to 8 of 8

Thread: Need help with fuzes on 2003 BassTracker Pro Crappie

  1. #1
    Join Date
    Feb 2006
    Location
    Kentucky
    Posts
    46
    Post Thanks / Like

    Default Need help with fuzes on 2003 BassTracker Pro Crappie


    All my fuzes were removed and I have been unable to find anything that says which fuze goes in which slot. Some are easy enough to figure out, but I end up with 3 that I can't and I am missing 1 and not sure what the size is. So, if anyone out there has one and can help me I'd appreciate it. Either a skematic, picture or simply start from top left to bottom right. I have 1 - 20 amp; 2 - 5 amp; 6 - 3 amp; and missing one. Thanks, Rick
    wldkat
    Take a kid fishin' Never know, one day they might take you...
    J~ <(((><

  2. #2
    Join Date
    May 2004
    Location
    Gloucester, VA
    Posts
    6,080
    Post Thanks / Like

    Default

    I created a table in Microsoft Word for my fuse sizes and what systems they powered for my 2006 PC 175. It may be at least a good place to start for your 2003. I will check and see if I can cut and paste the information into a reply when I get home where the file is. If that does not work, I will have you PM me your email address and I will send it to you.
    Last edited by PanMan_VA; 06-19-2007 at 10:56 AM.
    Keith
    2008 NWR Bash Crappie Champion
    2010 NWR Bash Yellow Perch Champion
    2010 Buggs Bash Smallest Crappie Award

  3. #3
    Join Date
    May 2004
    Location
    Gloucester, VA
    Posts
    6,080
    Post Thanks / Like

    Default

    Fuses
    5 amp
    Fwd Recirculator
    5 amp
    Navigation Lights
    5 amp
    Courtesy Light
    5 amp
    Bilge Pump
    5 amp
    Fwd Aerator
    10 amp
    Starter
    5 amp
    Aft Recirculator
    3 amp
    Depth Finder
    5 amp
    Aft Aerator
    3 amp (added)
    Alternate NEMA Bus (GPS)
    Formatting was lost when I posted the table. The first 5 fuses are the left column of the panel and the last 5 fuses are the right panel.

    Here are the fuse sizes and the equipment on each circuit for my 2006 PC 175. I added the 3 amp fuse on the lower right corner whan I replaced the factory depth finder with a 332c. You may be able to use it as a guide to figure out your fuse panel.
    Last edited by PanMan_VA; 06-19-2007 at 03:28 PM.
    Keith
    2008 NWR Bash Crappie Champion
    2010 NWR Bash Yellow Perch Champion
    2010 Buggs Bash Smallest Crappie Award

  4. #4
    Cane Pole's Avatar
    Cane Pole is offline Crappie.com 2011 Man of the Year * Crappie.com Supporter
    Join Date
    May 2004
    Location
    Pumphouse Tn.
    Posts
    24,003
    Post Thanks / Like

    Default

    You can call Bass Tracker customer relations and ask for the wiring drawings for your boat including the fuse panels. They usually will give this info upon request.
    Member BS Pro-Staff and Billbob Pro-Staff
    Proud Member of Team Geezer... authorized by: billbob and "G"

  5. #5
    shipahoy41's Avatar
    shipahoy41 is offline Crappie.com Legend - 2022 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Mar 2007
    Location
    Not Lakeside yet
    Posts
    14,432
    Post Thanks / Like

    Default

    Pan Man

    You dod a nice job with the mods on that Jon Boat. I just saw your home page. Those tackle benches are a neat idea.

    Old ship
    Aquatic Species Removal Engineer.
    May God be with you. Keep CALM and STAY ANCHORED with your faith.


  6. #6
    Join Date
    May 2004
    Location
    Gloucester, VA
    Posts
    6,080
    Post Thanks / Like

    Default

    Quote Originally Posted by shipahoy41
    Pan Man

    You dod a nice job with the mods on that Jon Boat. I just saw your home page. Those tackle benches are a neat idea.

    Old ship
    They worked out very well and made that little Jon a nice boat. If I ever modify another Jon, there is not much I would do different.
    Keith
    2008 NWR Bash Crappie Champion
    2010 NWR Bash Yellow Perch Champion
    2010 Buggs Bash Smallest Crappie Award

  7. #7
    Join Date
    Oct 2006
    Location
    Indian Rocks Beach, Florida, United States
    Posts
    1,185
    Post Thanks / Like

    Default

    This is the box from a 98 Tracker--90 hp--Hope it helps

    http://s154.photobucket.com/albums/s..._0738Large.jpg
    You can't finish what you don't start

  8. #8
    Join Date
    Feb 2006
    Location
    Kentucky
    Posts
    46
    Post Thanks / Like

    Default

    Thanks PanMan and Downwind. I think I got it now. I tried every tracker web site and even went to the local tracker dealership in Etown Ky and no luck. Any other time I see a dozen tracker boats - but I have been fisshing ponds on Fort Knox. I love to take the kids fishing - but sometimes (all the time) when the bite is slow, they have to find another way to amuze themselves. My boy see's the fuses and ask what they are for. The next day I get on the water, and nothing is working. I can't figure out anything. Checking battery connections and all. I call the wife and tell her; she says oh yea - Ricky had a pocket full of fuses in his pants last night. Man - ya got to love the kids.
    wldkat
    Take a kid fishin' Never know, one day they might take you...
    J~ <(((><

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP