PDA

View Full Version : SlabSauce survey



dhaire
05-04-2018, 02:42 PM
I have had lots of discussions and read lots of posts about applying SlabSauce. Richard Gene the fishing machine squeezes a dollop directly on the jig and that seems to work best for me. Slab suggests a quick and hard press that produces more of a spray. I have not seemed to do well with that technique. Some have suggested pouring a bit into a Nibbles cap and dipping your jig in that. Worked well for me until I kicked it accidentally while catching a nice crappie. So, for the sake of all that care what is your approach to applying SlabSauce on your jig?


Sent from my iPad using Crappie.com Fishing mobile app (http://r.tapatalk.com/byo?rid=87936)

"G"
05-04-2018, 02:45 PM
I just spray it on

SlabSeeker0485
05-04-2018, 02:52 PM
Spray it on. I have a question while we are here. How often do yall reapply?

StantheMan2567
05-04-2018, 03:02 PM
I am a dipper, couple sprays in the lid then prop the lid up in the recessed cup holder (stuff rag beside it or clicker counter) so it will not turn over. The cup holder has drainage holes for any spillage, but no spills yet. Give my jig a dip ever so often, more when i catch a keeper and go back to the live well. If any is left over I just rinse out with lake water and replace the lid and throw bottle back in scent bin. Good stuff the Sauce is, gonna try it on gills this summer!!

"G"
05-04-2018, 03:12 PM
Spray it on. I have a question while we are here. How often do yall reapply?
Re apply when you pull it in and you dont see a oil film in the water around it or if you cannot smell it or feel it on the bait or lure.

Sent from my SAMSUNG-SM-G891A using Crappie.com Fishing mobile app (http://r.tapatalk.com/byo?rid=87936)

Slabprowler
05-04-2018, 03:46 PM
I barely press the pump until some comes out hold it on the body by the jig head and let it run down to the tail.

need2befishin
05-04-2018, 04:04 PM
I pour 2 bottles at a time into one of those really small Gatorade bottles and use the dunk method. Lid fits super tight and bottle is thick and durable. Also has a large mouth so easier to get the jig inside the bottle. My small cooler has a mesh pocket on one end and the bottle fits snuggly in that area. Other than removing and replacing the lid I never have to move the bottle.

SlabSeeker0485
05-04-2018, 04:05 PM
I pour 2 bottles at a time into one of those really small Gatorade bottles and use the dunk method. Lid fits super tight and bottle is thick and durable. Also has a large mouth so easier to get the jig inside the bottle. My small cooler has a mesh pocket on one end and the bottle fits snuggly in that area. Other than removing and replacing the lid I never have to move the bottle.

Good idea! Im gonna have to try this

flycaster
05-04-2018, 05:58 PM
I filled up an eyedropper squeeze bottle, and it has a precision tip that I can place on jig, give a soft squeeze and apply as much as I want and
where I want. :twocents

tlefire
05-04-2018, 08:52 PM
Baby food jar wrapped in duct tape. Little dip, little shake, little throw, and big hook set. :biggrin

StantheMan2567
05-04-2018, 09:07 PM
300989

See post #4, a little dip will do ya! [emoji106]


Sent from my iPhone using Crappie.com Fishing mobile app (http://r.tapatalk.com/byo?rid=87936)

rking
05-04-2018, 09:56 PM
Same as has already been said. I have 2 bottles poured into a pure leaf tea bottle. It has along neck and a large top. Drop the bait in, lift it up out of the sauce and shake off excess. Works well. I feel like the pump spray was wasting a lot and getting where I didn't want it.

Redge
05-05-2018, 04:33 AM
I filled up an eyedropper squeeze bottle, and it has a precision tip that I can place on jig, give a soft squeeze and apply as much as I want and
where I want. :twocents

X2!


Sent from my iPhone using Crappie.com Fishing mobile app (http://r.tapatalk.com/byo?rid=87936)

Cardsfan55
05-05-2018, 06:24 AM
I use a nibbles jar.. I made a holder for it using a pvc fitting that I attached to my rod holder. Dunk the jig, shake off excess and put the lid back on until I need to reapply! I seemed to waste a lot trying to spray it on.. if I’m not on my boat and bank fishing I take the sprayer out and dunk the jig in the bottle unless the hook is too big then I’ll spray it on.

shipahoy41
05-05-2018, 07:09 AM
Spray just a little. You want to mask your scent and entice the crappie. You do not need much. I also mix a little Anise in with the slab sauce. I like flycaster's idea and may fill up a bottle and use the eyedropper method,

trypman1
05-05-2018, 10:51 AM
Great ideas, The nibble bottle is my way to go.

Ketchn
05-06-2018, 05:33 AM
put the dispenser spray bottle opening directly on the jig and squeeze it very slowly and it will apply just the right amount with no drip or spill
works perfect this way ....

Ketchn
05-06-2018, 05:36 AM
I think the garlic enhanced version is all that and to be sure if you test it on post spawn fish you will see the results :cheers2

Pnut
05-07-2018, 04:11 PM
I took some plastic tube jigs out of a thick plastic resealerable bag. Spray a few pumps in it, no waste and zip it when finished.

punchy
05-08-2018, 11:07 AM
also a dunker. put some in a small jar. apply as needed.

Chevync20
05-08-2018, 11:42 AM
Has or does anyone put slabsauce in soft plastics bag? Similar to the way Berkley Gulp does? I am considering trying this out next time and let them soak in it. Thoughts?