Left hand hardware for rod holders ... (Repost from long ago)

[rnvinc]

Seems my previous thread some time back with this info is yukky because of the PhotoBucket debacle ...
-----
-----

Ever searched for left hand threaded knobs for rod holders ...??

Here is left (and right) hand threaded hardware for rod holders (with a handy hole for tightening with plyers) ...



Here is Hindley 3/8" Stainless eye turnbuckles ... (with both a left and a right this will equate out to less than $3 per rod holder if you also change out your existing right hand rod holder hardware) ...
https://www.walmart.com/ip/Hindley-3...of-10/22933957

You will need a 3/8" left hand spiral tap ...
DWTG3/8-16LH 3/8"-16 HSS Left Hand Spiral Point 3 Flute Taps

And you will need stainless 3/8" left hand jam nuts (to create a "stop" on the stainless 3/8" eyebolts from the turnbuckle) ...
https://www.fastenal.com/products/details/0175059

Rickie

[Quackrstackr]

Ricky,

I actually saw some hand screws that were left threaded searching for regular ones on Google over the weekend. I can't remember now who was offering them but I was surprised that they actually made them. They were the same price regardless of which hand you wanted.

[wilbur]

I did the same thing with my hi-tecs after loosing a pole.

http://www.crappie.com/crappie/main-...reconstructed/

[rnvinc]

Bumping this back to the top because we have many new members since I first posted this ...

The 3/8” stainless turnbuckle at Walmart shows out of stock but here is another : (I would search for a better price) ...
3/8" Eye & Eye Stainless Steel Turnbuckle %

The left hand spiral tap link no longer works but they can be found easily online ... here is one at Fastenal :
https://www.fastenal.com/product/details/3172501

Rickie

[DockShootinJack]

Good stuff.