Crappie feeshermen are the most creative humans I know ...
Rickie
Chipppo posted a nice idea how to avoid putting holes to mount a transducer in larger transoms. Here's one that allows the transducer to be attached and detached in less than a minute:
The brass attachment is from the dollar store to hang wreaths.
The clamp is from Tractor Supply or any place that has hardware supplies.
The wood I had hanging around which used to be a stake.
Zip ties help stabilize the brass.
Been using this attachment for a few years and never had a problem plus the boat can barge through weed and the transducer positioned above the hull's bottom never picks weeds up.
Note: I also use the brass plate to hold my oars when not in use.
scrat LIKED above post
Crappie feeshermen are the most creative humans I know ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
same thing i did. i also put a T on it for ice fishing.
I got mine set up on an a piece of scrap 2x4,held in place with a C-clamp.been using this setup for years,very portable.
I used a piece of bar stock that is 1/8 thick. Bent it a U shape to fit over the transom. Drilled a hole in the inside part of the bar. Use a screw to keep it from coming loose.