I skip my bait in those situations and I cast , I don't dock shoot . i employ a parallel to the water surface type cast with a very firm flick of a stiff 6 footer .....full spool required as well
I shoot docks with 6ft bnm sharpshooter and a 7ft ozark and it works well. Have stated shooting floating docks and pontoon boats, my question is will and shorter rod give me better accuracy. The aim at a boat house and a pontoon is very different. You can just point it at a boat house or dock that has large shooting areas and do good but a pontoon and floating dock is very different. I know there are folks that can hit a 6inch hole from 25ft but not the norm. Any suggestions? don't say practice.....
I do the best with a 5.6 rod, shoot through a 4 inch hole , keep the line between the hook and rod tip parallel to the water, works for me.
I think you have better accuracy with the shorter rods. The longer rods are better for distance, especially with the lighter jig heads. IMO
With a shorter rod, get closer to the target "hole" if possible. Using a rod with a stiff backbone & fast action tip will get you distance... even on a shorter rod.
Do I think a shorter rod will give you more accuracy ?? Uh, no ... not particularly. Accuracy comes from getting the line angle correct, from rod tip to jig, and releasing the jig and spool line at the correct time. Meaning : line from jig to rod tip should be angled down towards rod tip just a few degrees ... and after jig is released & travels past the rod tip, you release the spool line. Accuracy is mostly "timing" the release correctly & aiming with the line so that the jig skips on the water just in front of the "hole" you're aiming at. Getting as low to the water as possible can also make a difference.
Good limp line helps, as does having a wide or long spool reel ... both for distance and accuracy, regardless of rod length.
Triton 190FS, 200hp Optimax, HB 798C HD & War Eagle 548LDV, HiTek, 30hp Mercury, HB 998C HD
Fishing is a privilege...catching is a bonus. Enjoy each precious moment we have to experience our great outdoors!
Short rod's will help a little for some people but the thing you don't want to hear is the key. Sorry but the more you do it the better you will get. There's really no shortcuts.
Sent from my SCH-I545 using Tapatalk
grizwilson, hdhntr LIKED above post
Shooting docks and shooting pontoon boats are two different things. The back side of a pontoon boat has a lot of stuff hanging down on at least one side. Missing your mark can be quite a loud sound and get the attention of boat owners and don't blame them. I understand practice and do but just thinking about what others use. You do get close to a pontoon to shoot and that was my thought on the shorter rod. Thanks
It depends on how tight the quarters are. Close and tight I'll take a short rod, but not under 5'6". Normally I use my everything rod, a 6'6" fast tip Lightning rod, now out of production. And I can hit a 6"square hole regularly, but not on the first dock. I have to warm up a little first. And I'm sorry to have to say it, but practice with no one else around is where you'll work out the kinks in your form. I've done it so much I don't think much of it anymore, just load and fire. Even with a tiny cork on the line, though that is way different and humbles you some. And it isn't always docks. Shooting and skipping under trees and brush is common on a trip to the river. After all, it is all about control of the presentation.
Creativity is just intelligence fooling aroundhdhntr LIKED above post
I'm no pro at it but am getting a lil better have only been 12-15 times but I love it.i have a b&m sharp shooter 4.5' and a 5' b&m that I seam to always go back too .I also have the Wally speed shooter in a 5.5'and a 7' and I really like them they are really sensitive. but am a lil more accurate with my shorter rods up close .i really like shooting tighter spaces like the floating docks and the pontoons. Much more of a challenge to me.
Too blessed to be stressed!