Glad it all went well. Had the nose/hinee issue myself last week. No fun. Hope you and Brenda enjoy this Holiday Season. Some extra cold weather maybe headed your way, or so I heard today. Stay warm.
Took my Pondtoon out to check all the electrical stuff. All electrical works. This is after a total rewire of the boat. My memory still serves me well on some things or the rewiring is just natural instincts. Either or both count.
Had several other issues. One was the electric winch would not release (unwind). Bad connection somewhere needs to be permanently resolved. Anther problem was only 2d would work with Lowrance 2d/di transducer. Yet to be resolved.
Third problem is a Lowrance firmware program issue. Everytime the head unit is powered down and back up, I have to turn image overlay off then back on to view my maps. This issue started after I did the go free upgrade. I have informed Lowrance.
I soaked a few Shinee Hineees and some roadrunners whilst shaking down the Pondtoon. The only thing I caught was a cold hinee and a runner nose.
Pics right before shakedown cruise. All wiring routed and covered and properly working, including wiring to throttle control.
Needless to say, I had the lake to myself.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G""G", Clint, crappie flash, prefers shiners, JET4, slackline, Hanr3, Cardsfan55, kjackson, S10CHEVY and 2 others LIKED above post
Glad it all went well. Had the nose/hinee issue myself last week. No fun. Hope you and Brenda enjoy this Holiday Season. Some extra cold weather maybe headed your way, or so I heard today. Stay warm.
Creativity is just intelligence fooling aroundCane Pole LIKED above post
Those controls look like Captain Kirk's controls at the Helm in the USS Enterprise on the TV show Star Trek.
Be safe and good luck fishingMidMsAngler LIKED above post
The one that is only reading 2d on the HDI transducer may need to have the transducer type reset in the installation menu.
Right transducer is selected. I will check pins and connector tomorrow.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"scrat LIKED above post
Cold hinee and runner nose......lol this cracks me up. Good job on the boat.
"Team Overalls"
Came pole,. Would that steering system work on a stick steer boat. Sometimes the torque is tough on my old shoulder. The hydraulic steering systems is bulky and get in the way of my trolling poles.