switch on my boat. I am replacing the timer pod because of a bad switch and I went ahead and put a new selector switch in also. I have the 4 wire timer pod (red, yellow, green & black wires) and the sierra 6 blade switch, 4 on the switch and 2 on the illumination part. I had written down the way this was all connected but between the time of taking this apart and getting back to putting it back together I have misplaced my diagram. So I am flying blind at this point. Ok here is what I have on the rotary switch, L1, L2, B1 and B2 pins and it is a On/Off/Auto type switch. I have been able to get the aerator work but the switch is in the auto position and I cant seem to get the timer pod to kick in and work for setting time. I have been in contact with G3 and gotten diagrams from them but I cant seem to find the diagram that gives me what wires connect to the L1 L2 B1 and B2 pins. Any help greatly appreciated
thanks
Larry
It is what it is!