PDA

View Full Version : Led strip lighting how too install



BAMA S
04-12-2016, 09:29 AM
We washed boat with purple power then wiped down applied area with alcohol. The strips are equipped with a 3 m tape strip. They can run off 12-40 volts. I'm running mine off my 24 volt to batteries so I don't kill my cranking battery . 235284

BAMA S
04-12-2016, 09:30 AM
235285
Applied product

BAMA S
04-12-2016, 10:08 AM
235291
We are soldering joints. No need to risk a bad connection

BAMA S
04-12-2016, 10:26 AM
235292
Mine side finished. It tucked in nicely behind bumper rail

Snubby
04-12-2016, 10:29 AM
Glad we could walk you thru it rotfl Just kidding.. looking good :ThumbsUp

M R Dux
04-12-2016, 11:14 AM
I've done several like that and found the adhesive on the strips will not adhere well to some surfaces. I started taking Goop Marine Sealant and putting a very thin bead on the entire backing as I was pulling the paper off then taping it with painter's masking tape every couple of feet till the Goop set up.

BAMA S
04-12-2016, 12:11 PM
235296 Walla