PDA

View Full Version : 3/8" Threaded Rod Holder Base, " In a pinch" for under $1.50



pescador
07-22-2015, 02:31 PM
I needed a few more bases and found these. Thought I would share.

209889209890

RetiredRR
07-22-2015, 02:53 PM
Great innovation.

"G"
07-22-2015, 03:01 PM
Thats great....thanks for sharing that

Redge
07-22-2015, 04:13 PM
Nice, thanks for posting.

huntinslabs
07-22-2015, 04:59 PM
^^^^ exactly

DockShootinJack
07-22-2015, 05:05 PM
Great find.

elkhunter
07-22-2015, 05:23 PM
Good thinkin!!!

Cray
07-22-2015, 05:32 PM
That's all you need. Good post.

pescador
07-22-2015, 07:49 PM
Thanks guys, just trying to contribute on a great site, lots of friendly helpful folks here.

Regards,
pescador

NJcrappie
07-23-2015, 01:46 PM
I do the same thing. Easy and convenient. I also like the way the shorter handle rods sit in those holders.
Nice post

blackfish
07-23-2015, 03:46 PM
Where did u buy?

"G"
07-23-2015, 03:56 PM
You can get them at Lowes or Home Depot...its a 3/8 ceiling fllange that is used to hang pipe.

skeetbum
07-24-2015, 08:12 PM
Push came to shove you could weld that to a bigger square of steel and powder paint for the bigger mount. Great find, That's smart thinkin.

okhawg
07-25-2015, 09:50 AM
They are harder to find, but you can find those fittings in 1/2" also.

Slabyanker
07-25-2015, 04:02 PM
I made my own at work one day. 16 of them. 3/8" x1" flat bar stock cut 2" long. Drilled 3 5/16 holes. Tapped the middle hole 3/8-16.