PDA

View Full Version : Crappie.com decals



SeaRay
07-05-2015, 05:54 PM
I swapped boats and was going to put some CDC decals on my new rig. I have a couple of the small ones on the clear plastic film along with larger ones with the paper backing. I know how to apply the larger ones with paper backing but I can't remember how to do the small ones on the clear plastic film.
Somebody want to refresh my memory?
Thanks
SeaRay

Redge
07-05-2015, 06:04 PM
Post a pic and I can lend a hand.

SeaRay
07-05-2015, 06:23 PM
Pouring down rain right now. Will get one soon as it lets up.

SeaRay
07-05-2015, 07:25 PM
208298

scrat
07-05-2015, 07:43 PM
My daughter put mine on the boat for me the back plastic pills off then you place on boat. Press the yellow part in real good as only the fish and writing will be left on the boat when you pull the front piece of plastic film off. Be real careful because it is real easy to tear. So go slow and separate the front from the yellow fish and writing.:twocents

Billbob
07-05-2015, 07:47 PM
yep that B it

"D"
07-05-2015, 08:32 PM
Ray, it is actually 3 layers. You want to only leave the middle layer on wherever you put it. Like they said, looking at it like you read it. Peel off the back. Leaving the yellow stuck to the front. Stick the whole thing on. Rub with a credit card. (paw paw Gene taught me this) Then pull off the top layer, being careful around each letter and the fish. If they start to come off, press it back down and try from a different angle. Good luck!!

SeaRay
07-05-2015, 08:36 PM
I thought that was how it worked, but for the life of me I could not get the 2 parts separated. I will work on it tomorrow when I have more time and better light.
Thanks guys.

"G"
07-05-2015, 09:01 PM
to get them separated just bend a small portion of one of the corners.....bend or fold one way.....and then the other way....you should see two edges then on the corner....peel off the side you need off.

Redge
07-05-2015, 09:12 PM
Or place a piece of masking tape on each side. Peel apart the masking tape and the layers should seperate for you.

SeaRay
07-06-2015, 03:40 PM
Or place a piece of masking tape on each side. Peel apart the masking tape and the layers should seperate for you.

Now that is a neat idea, will give it a try.
thanks

SeaRay
07-09-2015, 05:37 PM
Wow the suggestion about using masking tape worked like magic. Even when I did these on my other boat I remember struggling to get the outer sheet off so I could apply the decal. The masking tape worked like a charm.
Here are a couple of pics from the boat.
The SC decal had backing paper on it so it was easy to separate but the smaller CDC decals had been in my shop for a year or two and were really stuck together, but I put a tab of masking tape on each side and they came apart like magic.
Thanks for the help fellows.

208734208735

Redge
07-09-2015, 05:59 PM
Glad it worked for you, nice job!!