Right now you do not have that option. PDv2- Terrova with Ipilot or MotorguideXi5 all electric steer.
What are my options for a Tmotor for a 16/50 Jon boat? I'd like hand control w/ the spot lock feature.
T.I.A.
If I dont ask its my fault for not knowing
Right now you do not have that option. PDv2- Terrova with Ipilot or MotorguideXi5 all electric steer.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
How deep are you fishing. If fishing shallow you could buy a hand anchor stick or make your own.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
8'-20'.Any suggestions on making some anchor poles?Where would I get the fiberglass rod?
If I dont ask its my fault for not knowing
You might try doing a search on here for shallow water anchors. One fellow posted on building some and had pictures and some part numbers. I do remember him or someone else saying that had found some fiberglass rods fro WWGrainger that they were using. Also saw one made from small heavy wall PVC with about 2 ft of ground rod installed in PVC pipe with the pointed end sticking out about a ft. Some tie off to them and some build and install a ring bracket on side of boat to slip it through. Saw one where a catfish guide in Oklahoma installed several brackets made of Galvanized chain-link fence parts and used conduit and put a t handle on top to push into mud.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Cray Thanks for the suggestions.I hope the tmotor co.'s come out with a hand control with spot lock. Sems I always want something thats not made.lol
If I dont ask its my fault for not knowing
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
you have to have a electric steer to use on spot lock so that when it drifts away 15 feet it will take it back to where it was suppose to be.