PDA

View Full Version : Rod transport on dual console



crappiefarmer
01-02-2015, 11:46 PM
I am reconditioning a 20' dual console javelin bass boat. How are those of you with dual consoles stowing spider rig rods for transport from spot to spot and trailering? Old boat was single console and not an issue. Thanks for input, advice and opinions.CF

wannabe fisherman
01-03-2015, 06:13 AM
184372Scott at Hitec stuff made these for me. he's on the board here. Hauled 14' rods from Louisville to Ky lake and back with no problem.

DockShootinJack
01-03-2015, 11:07 PM
It wouldnt be hard to build build a set and incorporate an offset to the outboard side if more room is needed

Tom 513
01-04-2015, 11:30 AM
I think Cumberland sells a rail mounted offset holder for either 8 or 16 poles

bigcountry17
01-05-2015, 01:37 PM
Check out the Rod Safe! We have one on our boat.

http://i1113.photobucket.com/albums/k520/bigcountry_0825/IMG_2743_zpsa96996c2.jpg (http://s1113.photobucket.com/user/bigcountry_0825/media/IMG_2743_zpsa96996c2.jpg.html)



http://i1113.photobucket.com/albums/k520/bigcountry_0825/IMG_0063_zps718b81b8.jpg (http://s1113.photobucket.com/user/bigcountry_0825/media/IMG_0063_zps718b81b8.jpg.html)

Boa3
01-06-2015, 09:52 AM
Big country , could you give a link. I googled it and couldn't find it. Thanks

bigcountry17
01-06-2015, 11:40 AM
Boa3, The website below has the phone numbers, but not many pictures. I do know they can be found on Facebook. They are also sold at Grizzly Jig. They are designed by a local crappie angler.


https://www.rod-safe.com

bigcountry17
01-06-2015, 11:47 AM
http://i1113.photobucket.com/albums/k520/bigcountry_0825/rodsafe_zpsdc7d8644.jpg (http://s1113.photobucket.com/user/bigcountry_0825/media/rodsafe_zpsdc7d8644.jpg.html)

http://i1113.photobucket.com/albums/k520/bigcountry_0825/rodsafe2_zps148210fb.jpg (http://s1113.photobucket.com/user/bigcountry_0825/media/rodsafe2_zps148210fb.jpg.html)

Specklocker
01-06-2015, 01:13 PM
I had Driftmaster customize me one of theirs. Just give them the measurements.

cajun fryer
01-06-2015, 01:59 PM
Wish I had mine done. If we ever slow down I am gonna build one and then I will post some pics

murraycrappie
01-06-2015, 02:17 PM
Bought the rod saver at grizzly over the break. Only have used it a few times but really like it so far. Easy to install and keeps rods from getting tangled.

Ranger690
01-06-2015, 08:02 PM
Okay, that rod safe is pretty cool. Problem solved.

stormcloud
01-06-2015, 08:06 PM
What's next?

crappiefarmer
01-08-2015, 08:22 AM
Thanks for the ideas and pics Guys I will be going with one of these rack type systems I'm sure.CF

warbird
01-08-2015, 01:32 PM
http://i1225.photobucket.com/albums/ee383/warbirdkost/2012-02-18_11-30-34_702-1.jpg (http://s1225.photobucket.com/user/warbirdkost/media/2012-02-18_11-30-34_702-1.jpg.html)
http://i1225.photobucket.com/albums/ee383/warbirdkost/2012-02-18_11-30-13_949.jpg (http://s1225.photobucket.com/user/warbirdkost/media/2012-02-18_11-30-13_949.jpg.html)
cumberland works good for me
http://i1225.photobucket.com/albums/ee383/warbirdkost/2012-02-18_08-41-04_229.jpg (http://s1225.photobucket.com/user/warbirdkost/media/2012-02-18_08-41-04_229.jpg.html)