What does CMC say???? What ever they say is how I would go, we had one on a smaller alum bass boat and it done a great job.
Thinking about putting one on my 1542 war eagle . it has a 25 Yamaha 4-stroke . Have been told the weight of the four stroke is too much for the smaller jack plate / trim unit . think its called pt 35 .Any of you have this set up ? thoughts ?
What does CMC say???? What ever they say is how I would go, we had one on a smaller alum bass boat and it done a great job.
1990 Stratos 285 Pro 200 HP Merc
SpyderLok Rod Holders
Proud Member of Team Watch The Finger!!!
(662) 458-8925
I have a pt35 with a suzuki 15 with elec start bolted to it. No problems since 2009 when I got it. Check the full load capability at CMC/ TH Marine.
Lots of it probably has to do with mount holes.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
I believe the hydraulic pump is the same for both pt 35 and pt 130. Almost positive it is.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Don't know if this is comparing Apples and Oranges or not. I have a unit that used to be sold by Minnkota that's about the same size and rated for 35hp. It's on my old boat with a E model 40 Marineer which is a 2 cyl Yammaha. Got to be as heavy as your motor and never had any trouble with it.
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
I ran a 35HP 2 stoke on the small CMC for 15 years with no problem. My buddy has a 40HP stroke Yammy on his and no problems. It is rated for up to either 35 or 40 HP by CMC.
Mark 1:17 ...I will make you fishers of men
Did you look at the Panther unit at Bass Pro.........