Input please! New to pulling cranks!

[Cpainter87]

In light of everyone posting pictures of the great success they've had pulling cranks I've decided to give it a go. Problem being I need some advice on a line counting solution. I will be using power pro 15/4. I'm using this specific line because it is the same diameter as the Berkley fire line used in the precision trolling guide. I'm also using spinning reels. I will upgrade my gear once I learn how to get it done with my current set up. I just don't want to drop all that coin before I get my feet of the ground. Thanks! Also, any other advice it's welcomed!

[wilbur]

If you don't want to buy line counter reels I suppose you could mark your line every ten FT. Hardly ever have more thans 100ft. back. 50 to 80 is about normal.

[bowhunter012463]

Need to ask Wilbur, he pulls his crank all the time.

[Rees Guide]

get the depth master line by power pro, very easy to use.

[Slabo]

Go to the Mississippi board and read the sticky on pulling cranks it is all explained there, lots of great info !! It is very addicitive so BEWARE !!

[Rees Guide]

Depth hunter, my bad. It is 4 different colors and then starts over, each color is 25 feet long with a white mark every 5 feet. I put 200 feet on each of my spinning reels, spooling them all the same so as not to be confused.

[Cpainter87]

Rees, slabo, bow and Wilbur thank you all! I'm going to try to make due with what rigs I have at the moment here at a few nice local lakes. Once I get the hang of it then I will grab a few magda 15x's before I head down south early July. Just dropped 50 on Bandits but I'm going to look on that Chinese site for some cheapos right now!

[CrappieFlopper]

Rees Guide where do you get the Depth hunter line at.

[Rees Guide]

Looked it up on Amazon and ordered it there.

[CrappieFlopper]

Thanks