Trolling rods?

[Perch jerking]

What size rods to most of y'all use for trolling cranks for crappie?

[Brian Stucker]

16'

[M R Dux]

6' to 16'. I use a 6-10-14/16 off the sides to get bait separation and whatever I happen to have with a line counter on it off the rear. This year that will probably change with me running planer boards.

[rdobbs]

I run 4 poles. The two in the back or 5 1/2 to 6'. The two in the center sides of the boat are
approx. 7 ft. All are med action rods of different makes.I own a lot of rods, but none over
7ft.

[Brian Stucker]

I2' 10' 8'

[skeetbum]

I run my rods starting at 90* to the boat amidships and angle back a little with each one added. I usually run 6 but can run 8. Full setup would be 6, 8, 10, and 12 footers with the lines off the 12's being longest and the 6's being shortest. That way I not only get left to right separation but front to back also. Stiff rods lose more fish for me and my BGJP'S load up nice and I lose very few. Line counter reels would be nice but I just fake it, and have used spinning reels before with good success.

[Rees Guide]

I run 4 out the side on each side like Skeet does, 4'10", 10, 14, and 18, also run the long poles with linger line out.

[Smith2013]

I run 6 of the 14 footers off the bow of my boat.

[satdoc1]

8,12,14,16 out both sides of the back

[blueball]

this year im goin to run a 4'10'' ,8,12,16 off the sides and push 4 to 6 12fters on the front with 3oz weights,also bought some planer boards to try