1/24 oz jig head lets get this done

[FISHER HAWK 186]

Power of the people
could everyone interested take a moment send an email to do-it and request them look into makinga a 1/24 oz jig mold it is a highly sought-after jig in the crappie community and there's no dought would be very popular mold

I know a 1/32 oz mold can be modified ..... i have 4 i have had done but I would like to be able to purchase this mold without having to take it to a machine shop and if do-it can make a series of there molds to accept a trokar hook for the bass community why not do one for us

Lets see if we can get this done

[jusanothajoe]

been there done that, Do-it did not seem very interested.

[FISHER HAWK 186]

Lets try again

[pondhopper]

Custom Baits - Forum - Index You can try here . I'm not going to hold my breath though . Scroll down to request a mold .

[Buckie02]

been there done that, Do-it did not seem very interested.

I did the same thing. Very dissapointed in them.

[Fatman]

Sorry buddy - I'm another one who's requested molds on their site and by email and it's a no go. You'd think it would be easier now that they bought Jacobs baits - those are CNC'd so maybe sometime. I've emailed all the places that do custom plastics molds and they're just not ready to start doing lead molds yet.

I supposedly had a guy who knew someone and I've sent the jigs to be done but no quote yet. Crazy Angler used to do them but gave it up - and he did some excellent work!!!!!!

[pondhopper]

How many of you guys want a 1/24 oz mold . What hook do you want in it . If I can get it done I'm going to have to have a list of folks to show the guy . Would probably charge a 100 + for a mold . I'm hoping 7 or 8 cavities each side .

[JohnPaul]

Mine has 10 collared heads on 1 side.. And 10 ballhead on the other. It costed 250.00 out of Texas

[JohnPaul]

Also go over to caneycreekmolds.com there in with do-it maybe it may help some I dont know

[pondhopper]

I am going to take a mold to a guy I've been setting up for doing this kind of work . If he does well then I'm going to need a list of folks to show him how many are interested . Depending on the mold it will run about 100 bucks if you provide the mold . It will be 200 if the mold is 1/32 on one side and 1/16 on the other . That also means when the mold is modified the head will weigh more than 1/32 and 1/16 .