Justinp61... Post pix of your LSS Xducer install on your tin Triton...??

[rnvinc]

Hey Justin ....can you post a few pix of your LSS Xducer install on the transom of your Triton...??
(Specifically the relation of the LSS Xducer to the 2/d Xducer on the transom)...

It may help some with tin boats (Wilbur) trying to find the best Xducer setup with their Lowrance HDS ....

Rickie

[jimp]

Here is my LSS1 & 2d TD mount on an 04 Tracker PT175

[wilbur]

Do you read depth on plane with the 2D where it is?

[justinp61]

Here ya go.

[jimp]

up to about 24 mph (gps) yes, then it starts to lose bottom. I'm thinking bout getting another "sternsaver" and move the 2d down and up/under the step on my tracker but I've never been able to keep bottom lock with any 2d ducer mounted there. It doesn't really bother me that much as I'm pretty careful about where I go in the boat, and know my home lake pretty good. something I consider all the time, just haven't gotten around to it. LOL

[wilbur]

Thanks for the pics Guys I appreciate it. And Thank you Rickie.

[rnvinc]

Justin...(and jimp).... Do you get any SI image blockage at all showing on your screen with the 2 xducers mounted that close to the same height...??

Rickie

[jimp]

I don't, my LSS 1 is a bit lower than the 2d, not much but a bit. I do try to remember to raise the big motor a little bit but have probably not done it at times, and have not noticed any blockage from the big motor either, that I remember anyways.

[justinp61]

I don't have any issues with the two transducers, my LSS-2 transducer is mounted slightly lower than my 2d.

[wilbur]

I think I got it Now. If not its all adjustable.