Have it rebuilt. A good prop shop can make it like new, balance it and rehub it. You don't want to run a prop out of balance as it will cause premature failure of seals.
I have a 2000 25hp Johnson Motor with a three blade prop.It has two fair size nicks on two of the blades.Will this affect performance and is it time to replace it? GOOD LUCK FISHING TO ALL!!! Len
Have it rebuilt. A good prop shop can make it like new, balance it and rehub it. You don't want to run a prop out of balance as it will cause premature failure of seals.
Fair Winds and Following Seas
Bill H. PTC USN Ret
Chesapeake, Va
Definitely replace/rebuild it. A brand new prop for that motor is only $85, so it isn't worth taking a chance of wearing the transmission or seals due to excess cavitation.
Replace or repair, If you get ready to replace check iboats.com. I got a good deal on a prop.
Had the same thing on my 25hp 2000 merc - replaced with a ss prop and have never regretted it. Little more expensive but worth every penny.
If you ain't tyin' - you ain't fryin'
Take a kid fishin'
Scrap
Check out ebay. I have seen some new props your size sell cheap. Make sure you know what your shipping cost is before you bid.
Last edited by slab-happy; 05-24-2006 at 03:46 AM.
if vibration is bad enough it can also cause premature failure of your main bearings get a ss if you can afford it and you wont have to worry bout it anymore. if you cant any prop shop worth it weight should be able to fix you right up. compare the price of fixin it compared to a new one.... sometimes its cheaper to get a new one.
is it ok to file small nicks or even worth it
[never snap at the hand that feeds ya
I'll file a small kick just to keep from cutting myself when checking the prop.Originally Posted by painterfish
Fair Winds and Following Seas
Bill H. PTC USN Ret
Chesapeake, Va