PDA

View Full Version : Blue Water Led



HookItBait
02-09-2012, 06:33 PM
Thanks guys I think it turned out great.

811538115481155

shelldecoy
02-09-2012, 07:33 PM
pretty cool for sure

Jameslin
02-09-2012, 08:06 PM
Can't wait until I get mine installed there graet lights

skillett007
02-09-2012, 09:37 PM
looks really good

birdman
02-09-2012, 10:29 PM
Pretty slick!

Willbreaku
02-10-2012, 03:14 AM
real nice i think i will get some.

Blue Water LED
02-10-2012, 09:34 PM
Great Job!! Thanks

Blue

DEEPCOVER
02-10-2012, 11:09 PM
What kind of boat you got there? Is the livewell at the front?

HookItBait
02-10-2012, 11:28 PM
2012 lowe stinger 195, yes that is the front live well with bait bucket, i did not
light the back one yet as i didnt want to pull gas tank at this time, i did however light the back deck
with a red strip on each side not pictured.

MOJIGGIN
02-10-2012, 11:56 PM
look pretty nice,should come in handy.

bdorman
02-11-2012, 12:25 AM
I'm just waiting for deathb4disco to post a comment ;)

catman
02-11-2012, 06:13 AM
wow, that's way cool.

DEEPCOVER
02-11-2012, 10:46 AM
Thanks!!! Good looking boat!!

Ferdi
02-11-2012, 11:06 AM
Thanks guys I think it turned out great.


Could you draw out your wiring diagram and give some instructions please? Ferdi aka Fred

goofy1
02-11-2012, 11:47 AM
Man that's great. I am going to do that to my Xpress pfc18. I want to light up my decks like that.

HookItBait
02-11-2012, 01:28 PM
Wiring is very simple with these and the supplied wire and connectors they send with kits although I ordered extras of all of them to be safe. I should have included a picture of the 3 switches and dimmer I put in on the console. The deck, compartments and livewell all are on their own series 3 total. To put it bluntly I am an electrical idiot and to me this was even easy. I started at the farthest light from the switch in the deck lights that would be behind passenger seat (not pictured) I then ran all the way up that side under rail across the bow and back down other side to switch. At each light a 2 inch slit was cut to expose the pos. and neg. wires (clamp on the t-tap connectors) and simply plug in the light. At the end of series ground went straight to the battery and hot went straight from switch to battery 5 amp fused) once the 1st series went in and I got the hang of it, it took no time. They have some great instructional videos on you tube. Just search BlueWaterLed.

High Bridge Hooker
02-11-2012, 03:36 PM
I have the same boat and was getting ready to order lights from them did you get a kit or buy individual lights.

HookItBait
02-11-2012, 03:38 PM
both

Blue Water LED
02-13-2012, 07:55 PM
Wiring in is really simple, and our biggest kits can be ran on a 3 amp fuse. Feel free to call any time with install questions. We love to talk boats!

Thanks,
Blue

HookItBait
02-16-2012, 04:03 PM
Here are the switches i mounted in the dash to go with the lights, i put a few labels on them until i use them enough to get them memorized which means they may be permanent! lol

goofy1
02-16-2012, 11:04 PM
Well I want to light up my xpress. What should I order? I am not mechanical at all and have no tools. Who might be able to install them? I also need someone to install the remote set up on my power pole. Man I got to get these lights ordered and get them and power pole remote system installed by someone!

HookItBait
02-16-2012, 11:21 PM
Just go to their website and pick a kit! Thats what i did, I had a general idea, picked the kit
that was closest to what i wanted and went from there. once you pick the
kit you pick the colors you want!

goofy1
02-17-2012, 12:07 AM
I'll do that tomorrow. Thx

bugman
02-18-2012, 05:14 AM
Pat,
I now see why you've been spending so much time on your boat,very nice set up and the lights set it off that much more.....good work buddy.