That is one ingenious set up. You fellas have some creative minds at work to make it so simple yet so effective.
I am an old retired Mechanical Engineer and I love seeing things like this design.
SeaRay
This set up can be dropped into a bass boat in a couple of minutes without drilling or permanently mounting anything!! Removes just as fast.
The Adjust-double seat, no-drill extensions and the rod holders are all on our website and can be ordered seperately.
Adjust-double seat is $180 (for 3/4 pin), No-drill for the rod holders are $100 (any length) and whichever rod holders you want--All Cumberland Crappie rod holders can be used with this set up. Cumberland Crappie Accessories
The adjust-double seat can be made to fit 3/4 pin, 1.77 and the 2 3/8 if needed. We do custom work so if you need it in a length or height that isn't on the website just ask and it'll be done to your specs--most common sizes are on the site though. Adjust-double seat pivots on center pin and seats can be moved to within 90 degrees of each other.
By the way, custom work usually ships in 24-48 hours unless we get really busy. But a lot of our stuff is in stock and you won't have to wait weeks for it to be fabricated!
Tight lines!
Last edited by the crappie soldier; 01-29-2012 at 09:51 PM.
Cumberland Crappie LLC
Rod Holders, Double Seat Mounts and other Accessories
http://www.cumberlandcrappie.com
Phone (606) 425-7151
Poplar Lures Pro Staff
http://www.poplarlures.com
That is one ingenious set up. You fellas have some creative minds at work to make it so simple yet so effective.
I am an old retired Mechanical Engineer and I love seeing things like this design.
SeaRay
Mark 1:17 ...I will make you fishers of men
Thanks SeaRay!!
Cumberland Crappie LLC
Rod Holders, Double Seat Mounts and other Accessories
http://www.cumberlandcrappie.com
Phone (606) 425-7151
Poplar Lures Pro Staff
http://www.poplarlures.com
im getten ready to order one of the double setups. the one that swivles in the middle, waiting on boat to measure, do you have them in stock?
Cumberland Crappie LLC
Rod Holders, Double Seat Mounts and other Accessories
http://www.cumberlandcrappie.com
Phone (606) 425-7151
Poplar Lures Pro Staff
http://www.poplarlures.com
thanks
What have you coated the aluminum in ? Its shiny.
Cumberland Crappie LLC
Rod Holders, Double Seat Mounts and other Accessories
http://www.cumberlandcrappie.com
Phone (606) 425-7151
Poplar Lures Pro Staff
http://www.poplarlures.com
That is a nice setup I will be putting that on the wish list.
Can My umbrella still go in the hole for the pedestel or is it solid instead of open?
1990 Stratos 285 Pro 200 HP Merc
SpyderLok Rod Holders
Proud Member of Team Watch The Finger!!!
(662) 458-8925