Rod holder racks

[bigbob]

Anyone know of a good spider rig rod holder/rack system that slids over the boat seat pedestal on the fron deck?

[Crappie Reaper]

hmmm, I have been wondering the same for my rig, except, I want something removable to mount on both sides of the front seat. I have 12 rodholders cut out, sanded, ready to mount onto something. I too could use a few ideas.

[ShilohRed]

I build my own. Piece of flat metal with a black pipe welded to the end that slides over the pedestal then up front a black piece of pipe welded to the flat metal. then a piece of black pipe that slides down into the one welded to the flat metal. Then 3/4" cold Roll steel with a piece of 1" sq tubing welded to the cold roll. I will try to post a good picture of it tomorrow.
Or you can use angle iron on top to put the rod holders on.
Also Grizzly Jigs sells them.
Pete

[Speck]

I bought my first one at Grizzly Jig. they have the in 3,4,5 and I think 6 pole holders.

[ShilohRed]

I bought my first one at Grizzly Jig. they have the in 3,4,5 and I think 6 pole holders.

They also have them for 8 rods now. But its easy to build one.
Pete

[bigbob]

Speckhunter,

How do you like them?

[Crappie Reaper]

Show pics or give up the links guys.....please.

[ShilohRed]

Here is one picture of mine will post a few more after my slow PC loads them.
Pete

[slab-happy]

Nice pic Shilohred...what is the piece welded on the flat stock oppisite of the T post stem used for?

[ShilohRed]

Nice pic Shilohred...what is the piece welded on the flat stock oppisite of the T post stem used for?

That is the old rod rack, When I got the new rod holders from Callshy on the board I rebuilt it to fit them.
So now the holders are mounted on 3/4" cold roll steel, And not the angle iron.
Pete
I think you were asking about the round pipe on the back? If so it fits over a seat pole. And has a bolt that you can screw into the pole.
Everything can be adjusted. The T-Bar can be lifed up and down and the holders will turn sideways or tilt.