Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Cleaning reels

  1. #1
    Join Date
    Jul 2008
    Location
    Indiana
    Posts
    13
    Post Thanks / Like

    Default Cleaning reels


    What do you use to clean the gunk and grease out of your disassembled reels?

    Thanks
    Eric
    Last edited by CrappiePappy; 04-21-2011 at 08:17 AM.

  2. #2
    Join Date
    Feb 2010
    Location
    Tennessee
    Posts
    401
    Post Thanks / Like

    Default

    brake parts cleaner. and then reapply reel oil and grease liberally.

  3. #3
    Join Date
    Oct 2010
    Location
    Kentucky
    Posts
    53
    Post Thanks / Like

    Default

    be careful using brake parts cleaner it can eat up the finish and some plastic parts. The non flammable kind is a little more forgiving. My favorite would be a little charcoal starter fluid.. All ways use chemical proff rubber gloves so you don't get sick and die. Don't forget you're eye protection as well. electric parts and conector cleaner is good to but to me it is the same as the none flammable brake parts cleaner.

  4. #4
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,388
    Post Thanks / Like

    Default

    Mineral spirits in small glass bowl and a acid brush or small stiff bristle. Paint brush. Clean parts then I spray good with starting fluid. The starting fluid will cut any residue from mineral spirits. Neither of these will harm plastic parts or finish. Just remember starting fluid is dangerous inside. Lube gears with any of the good real greases and I use hot sauce oil on bearings and shafts.
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979




  5. #5
    Join Date
    Nov 2008
    Location
    cincinnati
    Posts
    4,272
    Post Thanks / Like

    Default

    use NON-CHORLINATED (spelling) brake cleaner.....also works great on semi auto pistols...... but it has to be the non-chorlinated stuff, other wise it will eat away finishes.......have a great one, God bless!!!


    -ROMANS 10:9- PHILIPPIANS 4:13

  6. #6
    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    298
    Post Thanks / Like

    Default

    dawn dish soap and hot water. i stay away from harsh chemicals as it will eat the plastic and paint up. been doing reel repair for about 15 years now and no problems at all.
    Take a man hunting or fishing for a day he'll eat for a day.
    Teach a man to hunt or fish and he'll eat for a lifetime.Thumbs Up

  7. #7
    Join Date
    Nov 2008
    Location
    Fairdealing ky
    Posts
    391
    Post Thanks / Like

    Default

    I use WD-40, wipe it all down and oil and grase lightly

  8. #8
    Join Date
    Feb 2010
    Location
    arkansas
    Posts
    2,139
    Post Thanks / Like

    Default

    alcohol. pour some in a bowl and put parts in it. put together and oil. been doing that for over 50 years and it has worked for me.

  9. #9
    Join Date
    Oct 2008
    Location
    Western MA
    Posts
    6,901
    Post Thanks / Like

    Default

    I also use WD-40 to break up the grease and crud. Then I flush with warm water and use a hair dryer to blow out any excess moisture. The reel is now ready to be properly lubricated. Grease on the gears & oil on the shafts and bearings.
    "A voyage in search of knowledge need never abandon the spirit of adventure."

  10. #10
    Join Date
    Apr 2008
    Location
    Northfield VT
    Posts
    12,341
    Post Thanks / Like

    Default

    Dawn dish soap and an old tooth brush. Dry fully and then lightly grease and oil. Too much grease and you'll clog up a reel quickly.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP