2 1/4 in ram mount will hold and some people are having scott (owner of hitek rod holders)make them one,heres a link of what some people are doing ,look at the 3rd post
http://www.crappie.com/crappie/main-...e-contest.html
I had heard that the large ram mounts would slip with the large depthfinders. Any other suggestions of a mount to use?
2 1/4 in ram mount will hold and some people are having scott (owner of hitek rod holders)make them one,heres a link of what some people are doing ,look at the 3rd post
http://www.crappie.com/crappie/main-...e-contest.html
I used the Ram mount 2 1/4 inch, see link below and it has never slipped. Its at the bow too on my crappie boat.
RAM MOUNT W/ 3" X 11" BASE SHRT ARM
I have a HDS7 with the 2 1/4 ram mount and have never had a problem....and a few times it has taken a beating
Green River Lake
I have a 997 on a 2.25" Ram. Doesn't slip at all. The 2.25" RAM will handle even the 1197 and HDS10s with ease.
Wannabe...
Wannabe...v2.0
A lot like the old Wannabe... except with fewer bad words. And Karate chop action. But, yes, still purtier than you.
I have the 8 on the ram mount no problems
ram mount no problem
PROUD MEMBER OF TEAM GEEZER
Crappie.com Pro Staff
Guber Pro Staff
Cane Pole Pro Staff
Haulin Ash Pro Staff