PDA

View Full Version : Hi-tech Holders?



wilbur
07-09-2010, 06:45 PM
Just got mine gonna mt. tomorrow are the wood screws that come with strong enough in plywood or do you need a plate underneath and through bolt them.

Barnacle Bill
07-09-2010, 09:08 PM
Depends on how thick the plywood is.

T.C.
07-10-2010, 08:59 PM
they worked fine for me. im sure the plywood in your boat is think enough. I dont know of many boat makers that use less than 3/4 inch plywood on the decks, even if its a half inch it will hold fine. Im a machinist and the rule of thumb with threads is that if you get three full threads in whatever, it should hold. But of course there are sometime exceptions.

"G"
07-10-2010, 09:16 PM
Use the screws that came with them.....they will hold in the plywood just fine. I have four sets of four HyTeks mounted that way...no problems.

wilbur
07-11-2010, 03:55 PM
I tested them today everything A-Ok . Now if my seat bases will come in from grizzly I will be set. Thanks for the input.