i took one of the capp and coleman rigs apart to see how they were made one time. It isnt a knot at all. the leader is simply laced through the egg sinker about five or six times and you leave enough for a 8 inch or so leader to your bottom hook. then roughly 20 inches above the egg sinker you tie to the bottom of the three way. tie more leader material to side leg of three way and put hook about 8 in from 3 way. top leg of three way goes directly to main line. I made up a bunch with hooks on both, and some with hooks at the bottom and jigs at the top. I put them individually into a little ziplock bag for storage till i need them.