From what ive seen fron the add a seat it shouldnt be a problem
Do any of you spider riggers know if you can use the crows feet driftmaster setup if you have an add a seat? I already have one t-250 set up and don't want to drill any more holes in the front deck. Any help would be appreciated.
From what ive seen fron the add a seat it shouldnt be a problem
Stick yo jig in there!
The Add-A-Seat uses your present seat pedestal hole just like your boat seat does. The Crow's foot goes under the seat pedestal so it would work with the Add-A-Seat just like it would with your regular seat. It would NOT work with the adjustable-movable part of the Add-A-Seat bases though as these are a sealed unit. I sell both of these products and am very familiar with both products. It will work. If you are looking to buy check us out.
Extreme Fishing Concepts
Yadkin Guide
How sturdy is the crow foot any like or dislike about it?????
It is sturdier than you think because one side will support the other. The arms are at almost a 90 degree angle to each other and are tight. Both arms also set flat on the floor and steady each other. I was surprised. I know that I am a dealer but I will only tell you the truth on my findings. As a guide, I would feel good about using it and would use it. On my boat though I use my bases that attach to the boat cleats. If that were not possible then I would go with the crow's foot. You can ask the many crappie.com people that I have dealt with, I will not try to trick you. I don't need business enough to lie. I do sell these but do not have them on website at this time. Call me if interested. www.extremefishingconcepts.com
Yadkin Guide