PDA

View Full Version : Crow's feet + Add a seat



faburwell
12-09-2009, 05:51 PM
Do any of you spider riggers know if you can use the crows feet driftmaster setup if you have an add a seat? I already have one t-250 set up and don't want to drill any more holes in the front deck. Any help would be appreciated.

biggerjigger
12-09-2009, 05:55 PM
From what ive seen fron the add a seat it shouldnt be a problem

Yadkin Guide
12-09-2009, 06:43 PM
The Add-A-Seat uses your present seat pedestal hole just like your boat seat does. The Crow's foot goes under the seat pedestal so it would work with the Add-A-Seat just like it would with your regular seat. It would NOT work with the adjustable-movable part of the Add-A-Seat bases though as these are a sealed unit. I sell both of these products and am very familiar with both products. It will work. If you are looking to buy check us out.
Extreme Fishing Concepts (http://www.extremefishingconcepts.com)

Yadkin Guide

Love To Fish
12-21-2009, 10:30 AM
How sturdy is the crow foot any like or dislike about it?????

Yadkin Guide
12-22-2009, 05:24 PM
It is sturdier than you think because one side will support the other. The arms are at almost a 90 degree angle to each other and are tight. Both arms also set flat on the floor and steady each other. I was surprised. I know that I am a dealer but I will only tell you the truth on my findings. As a guide, I would feel good about using it and would use it. On my boat though I use my bases that attach to the boat cleats. If that were not possible then I would go with the crow's foot. You can ask the many crappie.com people that I have dealt with, I will not try to trick you. I don't need business enough to lie. I do sell these but do not have them on website at this time. Call me if interested. www.extremefishingconcepts.com

Yadkin Guide