B&M make one for around 18 bucks
I'd like to be able to hang a lantern like I used to over the side of the boat. Necessary? No, just something about the smell of burning bugs that I missed the last couple of times out. What do you guys use? I did some googling, no results.
B&M make one for around 18 bucks
Check out this link. Is this what you are looking for?
Lantern Holder
I made this one using 1-1/2" metal conduit and a 90 degree PVC conduit. The pedestal floor mount holds it.It can swing it to either side of boat.
Check out Driftmaster's Lantern Holder on my website. Scroll to the bottom of the page. Here is the link.
Driftmaster Rod Holders
Yadkin Guide
I like that Len. Is that just 2 pieces of conduit screwed to the 90 or is the piece coming up from the floor mount attached to something? I think even I could make something close to that!!
Everyone has a secret talent they didn't know about until tequila.
Yes that is two pieces of conduit bolted in the ends of the PVC. The piece coming from the floor is a piece of galvanized fence post because it was a tighter fit in the floor opening and the 1-1/2" conduit fit inside perfect.The brace under the 90" elbow is 15" inches of 1/2" conduit and the brace that is bolted onto the lantern shield to keep lantern from swaying is 3/4" inch flat aluminum 17" long.
Last edited by Len; 06-21-2009 at 01:54 PM.
Check out www.crappiekiller.com for an alternative that looks pretty good.
I'm just an ornery sinner saved by Grace:o