HaHa: 0
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
noggin power!
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie Wall Hanger II
do you just cut the plug end of the T/M and strip the wires, add clips, and plug into the battery terminals?Originally Posted by need2befishin
Our minds must be connected somehow. I did basically the same thing on my kayak. I used a thick piece of foam in the bottom with a rectangle cut out that fit the battery to prevent it from sliding around in the hard plastic case. Good job
Attachment 326958
Attachment 326959
Jamesdean LIKED above post
Crappie Wall Hanger II
Yes, striped wires and I just used the solder type ends that fit the battery terminals. Think they call them "spade" connectors.
Philippians 4:13 "I can do all things through Christ which strengtheneth me"
Wear that PFD, the life you save might be your own!!wannagofishin thanked you for this post
Crappie.com 1K Star General
Rickie
I consider both these high praise from two of my favorite "tinkerers" !!
Clint
Far West Kentucky
Old enough to know better and way too old to care!
Crappie Wall Hanger II
Would the Helix 5 base fit on the ammo can, or do you have to use a RAM mount?
Crappie.com 1K Star General
Look at the first picture in the thread. I used a Ram Mount so I could adjust the head anyway I wanted, but the HB mount would fit directly to the top of the fake ammo can. I am sure it would fit on the end of the top and the weight of the battery would still keep the can upright. You would then have to move the can around to see the face of the screen. The Ram Mount just makes it easier to move the head rather than the can.
Clint
Far West Kentucky
Old enough to know better and way too old to care!
Reply With Quote
