Thanks: 
Reply With QuoteMy 2013 Pro Team 175TF Coastal...
HaHa: 0
Crappie.com Legend - Moderator Jig Tying Forum
* Crappie.com Supporter
88 Bumble Bee
Having a narrow front deck has me shying away from doing a side by side set up. The depth finder and gps are now the same height as the holders and easier on my eyes. Gets busy with 8 rods sometimes. The rear seat has 4 baseplates so the holders can go out the back or sides. Trolling cranks solo is done with baseplates within reach after removing the post from the front seat and facing backwards, turn around the console gps/sonar, and auto pilot T/M. Very easy to do all this alone, don't use front livewell is the only drawback I can see. Second pic was before several of the changes. Thanks for looking.
Creativity is just intelligence fooling around
Crappie.com 1K Star General
My 2013 Pro Team 175TF Coastal...
For the Everlasting Glory of the Infantry.
Crappie Wall Hanger II
Not sure I'm on the right page but here goes. Been considering changing my trolling motor to a bow mount foot control but I'm concerned if the hard cable will flex enough to allow me to use it? I'm fishing out of a 1989 Bass Tracker Panfish Pro and it has a front deck that may or may not be a problem. Just wondered if anyone has seen or maybe has one that will eliminate my fears.
Everything is possible. The impossible just takes longer!
Crappie.com Legend
* Crappie.com Supporter
I sent you a PM !!! the info I sent you might be a answer for what you are wanting to do !!!Originally Posted by slabseeker1
"What if you woke up today with only the things you thanked God for yesterday"
"Life without God is like an unsharpened pencil - it has no point. "AMEN"
Crappie.com Legend - Moderator Jig Tying Forum
* Crappie.com Supporter
One of the main mfg make a TM with 8' cables instead of 5'. Not everywhere but they are available.
Creativity is just intelligence fooling around
Crappie.com 3K Star General
I have 2001 Nova boat and I have made several things myself for my set up. My dad (pop) and I fish side by side up front spider rigging and jig fishing and it is just a blessing to fish with him. The rod holders were made my uncle who owned the boat before us. I got some little pvc caps bolted to the rod holders for crappie nibbles. I made the fish finder mount up front and I'm running a 598 SI unit up there.I also made the daul fish finder mount at the console and I'm running a 597 di unit for maps and 2D sonar and DI, the 598 I'm using just for SI. We are very pleased with the boat and how we have her set up.
Thanks, Lynn
Crappie.com Legend - Moderator Jig Tying Forum
* Crappie.com Supporter
Nice rig Lynn. A lot of thought went into that. Good job.
Creativity is just intelligence fooling around
Crappie.com 3K Star General
Thank you skeet! I like your setup also.
Juiced Up Baits Pro Staff
K2 Coolers Pro Staff
Mike's Custom Crappie Jigs Pro Staff
djesse11 LIKED above post
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
LYNN and POP. I really like that.I have 2001 Nova boat and I have made several things myself for my set up. My dad (pop) and I fish side by side up front spider rigging and jig fishing and it is just a blessing to fish with him. The rod holders were made my uncle who owned the boat before us. I got some little pvc caps bolted to the rod holders for crappie nibbles. I made the fish finder mount up front and I'm running a 598 SI unit up there.I also made the daul fish finder mount at the console and I'm running a 597 di unit for maps and 2D sonar and DI, the 598 I'm using just for SI. We are very pleased with the boat and how we have her set up.
Thanks, Lynn
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com 3K Star General
Thank you sir. I treasure every minute I spend with him on the water or anytime.
Juiced Up Baits Pro Staff
K2 Coolers Pro Staff
Mike's Custom Crappie Jigs Pro Staff
Posting Permissions
