first thing would be to hit the plus sign and zoom in
List some things that can be done to make structure like this look bigger on the display (especially beneficial for small screen users) ...
pic credit to LeeLyons...
Rickie
Last edited by rnvinc; 09-21-2017 at 05:26 PM.
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
first thing would be to hit the plus sign and zoom in
Retired golf addictbarrelslime, apporter LIKED above post
Set top depth range at minus 5 and set bottom depth range to 25 as long as you know you will be looking in water less than that deep.
I would stop the unit by hitting the up down and sideways button. Then curser over to what I wanted to see and use the + button to enlarge the picture. After doing this you can also hit the mark button if you want to save it as a waypoint to come back there later.
Be safe and good luck fishingapersohn17 thanked you for this post
yep, like roy said ref. to taking out some of the top depth and adjusting the depth level to 25.
rdjj71m LIKED above post
Very good guys ...
There is also the possibility of speeding up the Chart speed on HB...or slowing the boat down on Lowrance to stretch out the echoes ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
I'm pretty sure only 2d Chart speed can be adjusted on Lowrance ... SideScan and DownScan scroll speed are fixed ...
That's why I mentioned slowing the boat down with Lowrance to stretch the white fish echoes somewhat on the DownScan image ...
I do recall Fishton saying decreasing SI Range in Lowrance will increase Imaging scroll speed some ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
yep its my photo...... This was taken with an Elite TI7 ... fist time I had it on Sam Rayburn.....