Jig Pictures

[shipahoy41]

Here is my favorite. It is soldered and powder painted. Tail can be Kip or rubber.

[Jubs]

Here is the "Jubs Craw" pattern I have been working on for a couple of months.

Black barred craw orange zonker version







Squirrel tail version







Craw orange zonker version

[lunker]

Jubs, those look great. No telling what you liable to catch on Pickwick with one of them craw daddys. Any chance a brother could get some details on tying one or buying one?

[Sam W.]

No skilled fly-tying here, but this is an idea I've been working on for some time. The idea is to place the weight farther back on the hook shank, causing the jig to sink horizontally rather than nose-down when paused. The fishing I did with these before our weather turned bad was very promising, and I've sent some to Gerald in S.C. for some winter testing in his warm climate.

#1 Eagle 575 Jig Hook.
Czech crystal glass bead with the inside hole painted for a "cat's eye" effect.
Nickel plated brass weight bead - I make these jigs in 1/32, 1/16, and 1/8 oz. A 1/16 oz. jig is pictured.
Silver plated copper crimp bead - these jigs are lead-free.
Tail material is twisted white nylon twine inserted through the beads and looped around the front of the hook. Loop is secured with a drop of superglue. The nylon takes any color of soft lure dye.

The nylon tail has very good action in water, and unlike feathers it absorbs water like a mop. This adds a lot of temporary weight for casting. I'm claiming a Trademark on the name because I may eventually start a website and sell these - but I want to do a lot of test fishing and perfecting them first. A tough job, huh?

[jigtwins]

Watermelon sparkle powder paint head 1/16
Medium insect green chenille
Green hackle
Gold flash
Black thread



Chrome powder paint head 1/32
medium Lt blue chenille
white hackle
pearl flash
white thread

[Doc Crappie]

My first attempt at trying to duplicate a baitfish from my area, will have to make a few suttel changes but overall not too too bad for the first attempt

1/20 oz jig head
#4 sickle hook
winter ice chenille
White Marabou
white thread
head is PP in Baitfish

[LedHed]

Manipulated Minnow Head Jig

1/32nd VMC # 4 Hook
3/0 white flat wax thread body
Fluorescent white marabou tail

These jigs are considered proto types. They were partially flattened and shaped to mimic a shad profile.

Attachment 35407

[LedHed]

BS Chub Head Jig

1/32nd Matzuo Sickle #6 Hook
3 Custom mixed color powder paint
3/0 Fluorescent green flat wax thread body
Fluorescent green marabou tail

These jigs were tied for a CDC jig swap.

Attachment 35408

[Uncle Grump]

LedHed

Your link gets/produces a nasty-gram....

UG

[PBUG2009]

heres a few