I have a 727 on the bow, it seems to work good first thing in the morning. Then the temp will start flashing and the voltage readout will jump to 16v. I have tried to shut it off and turn back on but wont reset back. Anyone have a clue to what might be going on?

Also I have a interlink installed between for my 797 and 727. I have it wired as senerio #2. If I power up the 797 first which has the gps and weather sense connected to it. Then power up the 727, I wont get any information on the 727. But if I power up the 727 then the 797 I will get the information on the 727. Is this the norm for this?

__________________
Ted

Neither snow nor rain nor heat nor gloom of night will keep me from crappie fishing!

Anybody?

__________________
Ted

Neither snow nor rain nor heat nor gloom of night will keep me from crappie fishing!

No idea on the interlink question, but on the voltage......are you sure you don't have a problem with your batteries or connections? Can you meter the connections when you get a reading of 16V and see if you actually only have 12V? Even if you don't, I'm thinking your problem may lie with a poor connection, corrosion or a problem with your batt.


Wannabe...

We had kinda same problem. Interlink was bad. HB sent us new one free in three days.

__________________
FISH-ON!!!!!