The ones made on pallets will only last as long as the pallet . If I was going to use pvc , it would be able to stay with nothing to break down .
The ones made on pallets will only last as long as the pallet . If I was going to use pvc , it would be able to stay with nothing to break down .
Moderator of Beginners n Mentoring forum
Takeum Jigs
I can get all the Plastic Pallets that I want from work....you can zip tie 4 milk crates filled with a block on the bottom 4 corners to sink them. You can layer them on each other for minnows, or layer them with 4 more milk crates on each corner per layer....they will last forever. The downfall is the weight and the bulk...you need a flat-top to slid them off, or a lot of strong backs.
Keitech USA Pro StaffLowellhturner LIKED above post
How did you attach the plastic pipes to the pallet?
A series of plastic bread trays held up by 16- 20 red 10 holed bricks using VHD zip ties top and bottom ideally with some Osage orange sticks and small limbs also zip tied into place with just 2 14" cement blocks on diagonally opposite sides, this ensures that even on a steep incline the free end will tend to dig in, on a flat bottom it should settle at an angle eventually and provide a predator hiding place beneath it...
Lowell you still have an open Invitation to come to MS and show us how yours work!!!!!! Stay WARM!!!!!!!
Lowellhturner LIKED above post
Happy New Years to all whom visit here !