Great post.
I use Bobby Garland Crappie Jam if slow AM bite. Crappie nuggets too at last resort. Bream obviously do best in afternoons for me.
Sent from my SM-G955U using Crappie.com Fishing mobile app
Great post.
FWIW, almost any small jig is great for bream. The little trout magnets and crappie magnets are killers, and they're not hard to find. Marabou jigs are awesome, too.
Crappiejeff LIKED above post
FWIW ... again ... the main Bream forum is filled with reports of guys catching bream on jigs. I don't doubt Dynamax are good, but I wouldn't bust a gut tracking them down.
I believe these are original danamax jigs from the 80's-90's. I used to get them at Bates and I think Toad Suck One Stop. They were not packaged. They had them in one of those divided clear plastic boxes and you'd pick out what you want. They were kind of expensive at 79 cents each when you could buy marabou jigs everywhere for 9 or 10 cents each.
Most had no tail or only a wisp of tail. The tinsel was tied as "chin whiskers".
Another good micro jig for bluegill and redear is a 1”” Black Charlie brewer slider on a 1/32 black horse head spinner jig head. Deadly! I also really like the bison and black colored trout magnets.
Sent from my iPhone using Crappie.com Fishing mobile app
Matt Schroeder - AGFC - (877)470-3309 - [email protected]
step 1. get some tiny black plastic grubs with no curl tail
step 2. get white live rubber spinnerbait skirt
step 3. get some 1/32 & 1/48 jig heads
step 4. Pull off 1 filament from the skirt
step 5. run the filament through the body twice to form an x to simulate legs
final step. Put on jig head and catch bream (Crappie nibble white stuck on hook helps)
I use a hook to thread them. Poke hook through and place filament under barb and back it out. Of course I like to buy mine premade but when I run out these work fine.
Crappie bite twice a day. 15 minutes before I get there and 10 minutes after I leave.
The two loudest sounds are a gun that goes bang when it is supposed to go click and one that goes click when it is supposed to go bang.
If you rob Peter to pay Paul, you can generally count on Paul's vote.
We can Tye any jig in any size you want !!!
Sent from my SAMSUNG-SM-G891A using Tapatalk
Pro Staff:
Excel Boat (Meatgetter Edition)
Crappieholic Apparel
Hi-Tek Stuff
Ozark Rods
Please support these great companies!