New Pole Perch

[Cane Pole]

I built this perch out of scraps. Ima gonna use it at our dock when fishing. We have lost numerous poles over the years, Mostly fish pulling them in the lake or stepping on them.

I will improve it once I prove that it is practical.

The perch works by loosening the wing nut on top, extending the threaded rod enough to allow the T to pass thru the deck crack and twist. Once the T is perpendicular to the deck crack, the perch is tightened in place with the wing nut. I will replace the wing nut with a fluted knob once I check everything out. The T part will be a welded rod and part of the thru rod at a later date.

I have some Bee Ready pole holders I will put on the top bar.

This rig should be cheap to make.

[STUMP HUNTER]

Another cool idea That will be easy to store or use, nice!

[catman]

Looks good CP.

[wilbur]

Just make sure BillBob don't trip over it and fall in the water.

[catchncrisco]

Just make sure BillBob don't trip over it and fall in the water.

Yeah..he could spill his beer .

[pesce]

BillBob is always by the women he won't trip over anything but the goober

[vic n]

How about cutting some shallow V's into the one o'clock -two o'clock area to keep rods from sliding left or right?
Looks good!

I love that it's going to be so portable with only a twist of the wing nut!

[Billbob]

that will work

[wilbur]

I love that it's going to be so portable with only a twist of the wing nut! [/QUOTE]

Im sure the neighbor kids will love that too.

[Cane Pole]

How about cutting some shallow V's into the one o'clock -two o'clock area to keep rods from sliding left or right?
Looks good!

I love that it's going to be so portable with only a twist of the wing nut!

Good idea. I have some old pole holders to try out

Easy to change the perch rod for different outfittings. Cheap too.