Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 4 1234 LastLast
Results 1 to 10 of 33

Thread: spider rig ????????

  1. #1
    Join Date
    Nov 2008
    Location
    cincinnati
    Posts
    4,272
    Post Thanks / Like

    Default spider rig ????????


    im not sure if im doing somthing wronge or not, but when i try to spider rig (here in ohio only 2 poles per person so maybe not true spider riging), i have trouble keeping the rig in front of the boat and verticle (or close to verticle), i dont have a T-bar type set up yet, so as of right now i'm using scotty pole holders, one diff i notice between the T-bar type set up and my pole holders is that the T-bar looks like it keeps the reel above the tip of the pole and the tip close to the water, with my pole holders i can somewhat achieve this but no where near the angle i see others with the T type setup. i usally use anywhere between 1/4 up to 3/4 weights, is this enough? also im usally going about .8 mph at the slowest, i did buy a drift sock thinking i may need to slow down some but havent made it out to try it yet. I have tried several rigs and even the pre-tied two hook crappie rigs from the local wally world and have the same problem with em all. although last time i was giving it a shot i did manage a double on the two hook rig, though i had a hawg, turned out it was two 11 inchers, but this happend as i let of the troller to let the rig catch back up, still pretty cool experience, none the less any help would be awesome, thanks all and God bless


    -ROMANS 10:9- PHILIPPIANS 4:13

  2. #2
    rnvinc's Avatar
    rnvinc is offline Crappie.com 2016 Man of the Year * Member Sponsor
    Join Date
    Sep 2008
    Location
    West Ky
    Posts
    13,089
    Post Thanks / Like

    Default

    I think you may need to slow down even more...to a mere crawl.....

    I only use 3/8 oz. weights and my lines are near verticle in the water....
    www.podunkideas.com <--Click here
    ------------—————
    https://www.crappie-gills-n-more.com/
    https://cornfieldfishinggear.com/

    ------------------------>> Pro Staff Sonar Advisor

  3. #3
    Join Date
    May 2008
    Location
    crossville alabama
    Posts
    2,677
    Post Thanks / Like

    Default

    you can also use lighter weight with a slip cork and minnows and wind drift
    The fishing was good,it was the catching that was bad

  4. #4
    Join Date
    Aug 2007
    Location
    Boiling Springs N.C.
    Posts
    4,893
    Post Thanks / Like

    Default

    Yep, you need to slow down, keep your lines vertical.

  5. #5
    STUMP HUNTER's Avatar
    STUMP HUNTER is offline Super Moderator * Crappie.com Supporter * Member Sponsor
    Join Date
    Jan 2008
    Location
    PIEDMONT SC
    Posts
    20,574
    Post Thanks / Like

    Default

    I'm with the rest---slow down. I never get over .5 and most the time around .2. If you are keeping your trolling motor on all the time that is the problem. You need to just tap the motor enough to keep your boat moving SLOWLY.
    PROUD MEMBER OF TEAM GEEZER ---------
    Ascend 133X 13' - MotorGuide Xi3 & Mercury 4

  6. #6
    Join Date
    Feb 2008
    Location
    west Michigan
    Posts
    5,542
    Post Thanks / Like

    Default

    I have found that "pulsing" the troller AND GOING SLOW work best for me. I get a lot of hits just after pulsing the troller. Everyone is right about going slow.

    Life has many choices, eternity has two...choose wisely.
    Unapplied biblical truth is like unapplied paint...how many gallons do you have sittin' around? U.D.

  7. #7
    Join Date
    Jan 2005
    Location
    Decaturville, TN
    Posts
    5,032
    Post Thanks / Like

    Talking

    Dont think that having your lines vertical is all that important, trolling is the only way a lot of folks fish around here, some go slow and some go fast, i use a 2oz. wt and like my lines to be about2-3 in past vertical.
    PROUD MEMBER OF TEAM GEEZER

  8. #8
    Join Date
    Aug 2006
    Location
    W Little Rock
    Posts
    4,253
    Post Thanks / Like

    Default

    I can only manage 4 poles at a time. I use 3/8 oz weights. "Bump" the trolling motor to go slow as possible. My boat catches the wind which makes it difficult to go into the wind. I catch myself going too fast trying to correct my angle. I am in a stick steer and have my rods in individual holders. To acheive the angle I wanted, I used a vise to bend the studs on the holders.
    DP
    I am a heterosexual male. 2 Chronicles 7:14
    "If my people who are called by My name will humble themselves and pray and seek My face and turn from their wicked ways, then I will hear from Heaven and will forgive their sin and heal their land."

  9. #9
    Join Date
    Aug 2008
    Location
    Hernando, Ms
    Posts
    10,194
    Post Thanks / Like

    Default

    Go Sloooooow!
    Carl's Guide Service
    Sardis Lake
    Enid Lake
    Grenada Lake
    901-734-7536

  10. #10
    Join Date
    Mar 2006
    Location
    Greers Ferry, Arkansas, United States
    Posts
    9,037
    Post Thanks / Like

    Default

    Quote Originally Posted by feelay View Post
    Go Sloooooow!
    Yep +1 on the slow

    WALLY MARSHALL PRO STAFF
    CATCHIN' CRAPPIE GUIDE SERVICE
    CREEKS ROD TRANSPORT RACK
    870-307-2572

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP